ISGB-type Pipe centrifugal pumps will be demolished in the ISG with the United States and Switzerland on the basis of advanced technologies developed as a novel structure, technologically advanced new products. This series pump by the State Quality Inspection Center, Zhenjiang Branch test qualified, and in strict accordance with international standards ISO2858 and the latest national standards GB/T53058-93 pipeline centrifugal pump designed and manufactured.
The vertical pumps, particularly in the overall structure of a bold breakthrough in the design. Using an independent bearing body, shaft support, to solve the original vertical pump motor bearing supported by the inadequacies; with excellent hydraulic model of the impeller, eliminating the original vertical shaft to the power of large deficiencies; motor is Y series Standard General Motors to address the long axis of the original vertical pump plus auxiliary motor to replace the difficult problem; the same time, 100% of the demolition of the structure will solve the replacement of high-power water pump bearings, mechanical seal, impeller, shaft problems. The pump with the domestic similar products, compared with a more stable operation and long service life supporting more convenient, easier maintenance, etc., no replace the advantages. In the vertical pump product lines are the domestic front, leading the technical ranks, is an alternative ISG Vertical pump, IS-type centrifugal pump, S-type double-suction centrifugal pumps and other conventional variety of the best products
ISGB type be demolished Pipe centrifugal pumps: mainly used in industry, urban high-rise building water supply, fire fighting pipe pressurization, HVAC chilled and hot water, long-distance cycle of pressurized water supply, and production delivery process. PTHB type be demolished single-stage chemical pumps: for metallurgy, chemical industry, textile, wood processing, paper and restaurants, bathrooms, hotels and other high-temperature hot water boiler loop pressurized transport and urban heat pump heating system. 1, pressurized water to two high-rise buildings, factories system to carry the 3, pressurized water treatment systems 4, central air-conditioning hot and cold water cycle 5, the boiler system to carry the six, a swimming pool water 7, the pressurized flow loop
Liquid temperature: -15 ℃ -120 ℃. Working pressure: Maximum working pressure ≤ 1.6Mpa, the system pressure = inlet pressure + pump working pressure ≤ 1.6Mpa; ambient temperature does not exceed 40 ℃, relative humidity of not more than 95%; suction of water or similar liquids to clean water liquid, its volume of solid insoluble matter per unit volume does not exceed 0.1%, class degree ≤ 0.2mm.
For example: ISGB100-160 (I) AB ISGB-be demolished centrifugal pumps 100 - pump inlet and outlet nominal diameter (mm) 160 - Impeller nominal diameter (mm) I-Flow Classification AB-impeller through the first and second cutting |